Setting up VVX's Phones to test without DHCP
When testing Event ZeroEnoten's Provisioning Software with a few devices you may not want to setup DHCP at this stage. The easiest way to make the changes required is to set the provisioning Bridge details directly on the phone. This can be done in 2 different ways. The easiest being through the phone's web GUI alternatively you can do it directly on the phone.
Note: The Event Zero Enoten term Provisioning Bridge and Polycom term Provisioning Server are the same server. As Event Zero Enoten UDM Pro uses two servers for provisioning to avoid confusion we call the server that delivers the configuration the Provisioning Bridge.
...
The phone is now setup to provision from the Event Zero Enoten Provisioning Bridge you do not need to perform Step 4. Select the "Reboot phone" option and the phone will restart and pull its configuration from the Provisioning Bridge.
...
If you experience issues at this point please contact Event Zero Enoten Support on support@eventzero support@enoten.com
Step 4: Setup the Provisioning Server with Phone Interface
...
In the "Provisioning Server" settings change the "Server Type" to HTTP and set the "Server Address" to the IP or FQDN of the Event Zero Enoten Provisioning Bridge Note for UDM Express only you also need to add the port address as :81 to the IP or FQDN.
...
The phone is now setup to provision from the Event Zero Provisioning Bridge. On the "Administration Settings" screen select reboot and the phone will restart and will pull its configuration from the Provisioning Bridge
...
If you experience issues at this point please contact Event Zero Enoten Support on support@eventzero support@enoten.com